Description

The station consists of:

1- Pumping pumps:

• Origin: Italy.
• Equipped with an automatic separation and operation unit.

2- The system for injecting disinfection and sterilization:
First / Chemical injection pump:
• Country of Manufacture: Italy.
Second / chemical tank:
• Origin: local.

3 – Sand filter and contains the following:
First/ Control Head:
Secondly/ Al-Faisal:
• Filter media: layers of gravill of different sizes.

4 – Carbon Filter and contains the following:
First/ Control Head: Manual
Secondly/ Al-Faisal:
• Filter media: activated charcoal.

5- Micron unit:
Size: 20 in.
Porosity: 5 microns.

6- Ultraviolet sterilization unit:
.
The outer body is made of light-blocking stainless steel.

7 – Electrical panel:
A general electrical panel for the station shall be made to protect and control all components of the station
This electrical panel should permanently disconnect the station when the water is cut off or when the final tank is full.

8 – Connections and cocks:
All connections and valves in the station are of high quality P.V.C.

9 – Unit for separation of dissolved salts and heavy metals (Osmosis Reverse O.R:)
First/ High pressure pump: Origin: European Union.
Multistage high pressure pump.
Second / reverse osmosis membranes (Membranes O.R:)
III/ Reverse osmosis membrane container
Fourth/ accessories of the salt and mineral separation unit:
Flow meter to measure the amount of product and dispensing.
2″ pressure gauge.
• Pressure stop.
• Low Pressure
• .Solenoid Valve